|
Contents
Tested Memory
Memory testing has been performed under the following category:
Advanced Tested Memory
Intel provides the Advanced environmental test procedures, test software and necessary hardware to an independent test lab to perform Advanced testing as requested by the memory vendors.
Memory tested by Computer Memory Test Labs (CMTL).
Note: This link will take you away from Intel's web site.
System Memory Features
The D845GVAD2 board provide the following memory features:
- 2.5 V (only) 184-pin DDR SDRAM DIMMs with gold-plated contacts
- Unbuffered, unregistered single-sided or double-sided DIMMs
- Maximum total system memory: 2 GB; minimum total system memory: 64 MB
- DDR266/200 MHz SDRAM DIMMs only
- Serial Presence Detect (SPD)
- Suspend to RAM
CAUTION:
Do not use ECC DIMMs with this board. Using ECC DIMMs could damage the board.
Integrator's Notes:
- Registered DIMMs are not supported on the Desktop Board.
- Double-sided x16 DIMMs are not supported.
- Remove the AGP video card before installing or upgrading memory to avoid interference with the memory retention mechanism.
Note:
To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance.
The following table lists the supported DDR DIMM configurations.
| DIMM Capacity |
Configuration(Note) |
DDR SDRAM Density |
DDR SDRAM Organization Front-side/Back-side |
Number of DDR SDRAM Devices |
| 64 MB |
SS |
64 Mbit |
8 M x 8/empty |
8 |
| 64 MB |
SS |
128 Mbit |
8 M x 16/empty |
4 |
| 128 MB |
DS |
64 Mbit |
8 M x 8/8 M x 8 |
16 |
| 128 MB |
SS |
128 Mbit |
16 M x 8/empty |
8 |
| 128 MB |
SS |
256 Mbit |
16 M x 16/empty |
4 |
| 256 MB |
DS |
128 Mbit |
16 M x 8/16 M x 8 |
16 |
| 256 MB |
SS |
256 Mbit |
32 M x 8/empty |
8 |
| 256 MB |
SS |
512 Mbit |
32 M x 16/empty |
4 |
| 512 MB |
DS |
256 Mbit |
32 M x 8/32 M x 8 |
16 |
| 512 MB |
SS |
512 Mbit |
64 M x 8/empty |
8 |
| 1024 MB |
DS |
512 Mbit |
64 M x 8/64 M x 8 |
16 |
Note:
In this column, "DS" refers to double-sided memory modules (containing DDR SDRAM devices on both sides) and "SS" refers to single-sided memory modules (containing DDR SDRAM devices on only one side).
Updated: Monday, December 16, 2002
|
