|
Products
|
 Intel® RAID Controller SRCS28X |
|
|
|
|
|
| An 8-Port Serial ATA II RAID Solution for Applications Requiring High Performance and Reliability
The Intel® RAID Controller SRCS28X delivers a storage solution
that helps protect critical data while enabling enhanced performance, reliability, and scalability in the server itself for growing businesses.
It supports a high-performance bus, extensive memory, and a
flexible and accessible approach to system setup and management. |
|
|
|
|
| Features |
Benefits |
| Eight independent Serial ATA ports supporting SATA II connections at 1.5 Gb/sec and 3.0 Gb/sec |
High data-transfer rate, increased availability and flexibility. |
| 128 MB of embedded ECC DDR SDRAM |
Data integrity and performance. |
| Optional battery-backup unit providing up to 72 hours of data retention for cache memory |
Data reliability. |
| Support for RAID 0, 1, 5, 10, and 50 |
Flexibility for optimizing performance and fault tolerance in a variety of solutions. |
| SATA II extensions and SAF-TE enclosure-management support |
Hot-swap drive support and drive status/identification for SATA II drives. |
| Intel® RAID Software: Intel RAID BIOS Console, Intel RAID Web Console, and Intel RAID Flash Utilities |
Ease of management and monitoring. |
| Intel® 80331 250MHz I/O processor |
Outstanding RAID performance. |
| |
| Intel® Pentium® 4 processor-compatible server boards and platforms |
|
| |
| Hardware |
| Processor |
Intel® IOP331 I/O processor operating at 250 MHz and with hardware XOR. |
| Memory |
128MB embedded ECC DDR SDRAM. |
| PCI Interface |
PCI-X 133MHz or 100MHz, PCI 66MHz, or PCI 32-bit/33MHz; PCI 2.2 interface backward-compatible to 33MHz, with support for 3.3V. |
| Serial ATA |
Eight SATA ports that support Serial ATA II extensions for hot-plug and enclosure management. |
| Form Factor |
Full-height, half-length PCI: 6.9" x 4.2" (175 mm x 107 mm). |
| Status Indicators |
Audible alarm, I²C connector (enclosure management) |
| Key RAID Features |
| RAID Levels Supported |
0, 1, 5, 10, and 50. |
| Reliability |
Optional battery-backup unit for up to 72 hours of cache data retention. |
| Scalability |
Online RAID-level migration and capacity expansion, without the need for reboot. |
| Configurability |
Variable stripe size, variable cache options, drive coercion, array spanning, variable rebuild rate. |
| Availability |
Auto hot-spare, auto rebuild, auto rebuild resume, drive roaming, controller migration, online capacity expansion, remote monitoring and management. |
| Operating System Support1 |
Microsoft* Windows Server* 2003 Enterprise Edition, Microsoft* Windows* 2000 Advanced Server, Novell* NetWare*, Red Hat* Enterprise Linux*, SCO* OpenServer*, SCO* UnixWare, SUSE* LINUX* Professional, SUSE* LINUX* Enterprise Server. |
| Power Requirements |
| DC Power Supply |
11W |
| +5 V |
0.85A maximum continuous current (with load-sharing enabled).
1.63A maximum continuous current (with load-sharing disabled). |
| +3.3 V |
1.20A maximum continuous current (with load-sharing enabled).
0.00A maximum continuous current (with load-sharing disabled). |
| Environmental |
| Ambient Temperature |
Operating (dry bulb): 0°C to 45°C. |
| Relative Humidity |
20% to 80% non-condensing. |
| System Requirements |
Intel®-based server or equivalent with PCI 2.2 compliant, PCI-X 133MHz, PCI-X 100MHz, PCI 64-bit/66MHz, or PCI 32-bit/33MHz slot. |
Safety and EMC Regulatory Compliance (Class A)2
(EMC regulatory compliance is based on integration with a validated Intel® server board and configuration as outlined in the Intel® RAID Controller SRCU42E subassembly guide.). |
| Country and District |
Certification
(Safety and/or EMC) |
Regulatory Marks
(Safety and/or EMC) |
| Canada |
CSA60950 / ICES-003 Class B |
ETL / ICES |
| Europe |
European Directives |
CE |
| International |
IEC60950 / CISPR 22 Class B |
Not Applicable |
| Japan |
Not Applicable / Class B (Verification only) |
VCCI |
| Korea |
Not applicable / RRL |
MIC |
| Taiwan |
Not applicable / CNS 13438 Class B |
BcontentI |
| United States |
UL60950 / FCC Class B |
ETL / FCC |
| |
|
|
1 Operating-system support is contingent on the operating-system support of the motherboard in which the controller is installed.
2 EMC regulatory compliance is based on integration with a validated Intel server board and configuration as outlined in the Intel® RAID Controller SRCS28X subassembly guide.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
Intel products are not intended for use in medical, life saving, life sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice. Availability in different channels may vary.
|
|  | |
|
