| Intel® Server Compute Blade SBX82 Features |
| Features |
Benefits |
| Support for one or two Intel® Xeon® processors starting at 3.20 GHz with 1 MB cache running at 800 MHz front-side bus |
More power, bandwidth, and processing performance to meet the demanding requirements of departmental workloads. |
| Intel® E7520 Chipset with support for up to 8 GB memory, and two-way interleaved DDR2 |
Maximizes use of Intel® NetBurst® microarchitecture and Hyper-Threading Technology to deliver world-class performance for peak server workloads. |
| Intel® Extended Memory 64 Technology (EM64T)Φ |
Provides compatibility with IA-32 applications plus pathway to future 64-bit-enabled applications. |
| Dual 1 Gigabit Ethernet channels |
Ethernet I/O for demanding, data-intensive applications. |
| Up to 2 integrated 2.5 SCSI drives |
High performance small form factor SCSI hard drives (RAID 1 with 2 HDDs). |
| Blade storage expansion module (optional) |
Ability to easily add hotswappable SCSI hard drives, and additional Ethernet, or Fibre Channel I/O for increased application performance (RAID 1E requires use of the HDDs on the SBX82 as well as the HDDs on the SBESCSI). |
| Intel® Server Compute Blade SBX82 Specifications |
| Processor |
Supports up to 2 Intel® Xeon® processors with 800 MHz system bus at 3.20 GHz, 1MB L2 cache or faster |
| System Memory |
| Four double data rate (DDR2) |
| Memory Capacity |
Support for 512 MB to 8 GB |
| DIMM Sizes |
56 MB, 512 MB, 1 GB, 2 GB |
| Memory Type |
2-way interleaved, DDR2-400, PC3200, ECC SDRAM registered DIMMs only |
| Drives |
| Support for up to two internal 2.5-inch hard disk drives |
| Support for up to two Ultra320 SCSI hot-swap hard disk drives (80-pin, SCA-2 connectors) available in an optional blade storage expansion module which connects to the server blade. Maximum data transfer: 320MB/sec on each Ultra 320 LVD channel. Supports RAID-1 or RAID-1E with the blade storage expansion module. |
| Size |
| Height |
24.5 cm (9.7 inches) |
| Depth |
44.6 cm (17.6 inches) |
| Width |
2.9 cm (1.14 inches) |
| Maximum Weight |
6.8 kg (15 lbs.) |
| Integrated Functions |
| Two 1 gigabit Ethernet controllers support full duplex, IBM Wake on LAN*, teaming and failover. |
| ATI Rage* 7000M video controller. |
| Local service processor provides interface for communication with the Intel® Server Blade Chassis and the management module, system and environmental monitoring, event recording and alert capability. |
| Light-Guided Diagnostics (LED lights indicate failing component). |
| USB buses for communication with keyboard, mouse, diskette drive, and CD-ROM drive.¹ |
| Intel® E7520 Chipset |
| Front Panel Buttons |
| Keyboard / Mouse |
This button is for associating the keyboard port and mouse port with this blade server; the LED on this button flashes while the request is being processed, then is steady when ownership has been transferred to the blade server |
| Power Control Button |
This button is located behind the control panel door; press this button to manually turn the blade server on or off |
| Video |
This button is for associating the video port with this blade server; the LED on this button flashes while the request is being processed, then is steady when ownership has been transferred to the blade server |
| Front Panel LEDs |
| Blade-Error LED |
When this amber LED is lit, it indicates that a system error has occurred in the blade server |
| Information LED |
When this amber LED is lit, it indicates that information about a system error for the blade server has been placed in the system Error log |
| Location LED |
When this blue LED is lit, it has been turned on remotely by the system administrator to aid in visually locating the blade server; the location LED on the SBCE unit will be on as well |
| Activity LED |
When this green LED is lit, it indicates that there is a hard-disk-drive or network activity |
| Power-on LED |
This green LED indicates the power status of the blade server in the following manner:
- Flashing rapidly — the service processor on the blade server is handshaking with the SBCE management module
- Flashing slowly — the blade server has power but is not turned on
- Steady — the blade server has power and is turned on
|
| Input/Output |
Power, cooling, removable-media drives, external ports, and advanced system management are provided by the Intel® Server Chassis SBCE. |
| Environment |
| Air Temperature |
Operating (system): 10°C to 35°C (50°F to 95°F); 0 to 914m (2998.69 ft) altitude
Operating (system): 10°C to 32°C (50°F to 89.6°F); 914m to 2134m (2998.69 to 7000 ft.) altitude
Non-operating (system): —40° to +60°C (-40° to +140°F) |
| Humidity |
Operating: 8% to 80%
Non-operating: 5% to 80% |
| Electrical Input |
| Input Voltage |
12 V DC |
| Safety Compliance |
| USA |
UL 60950 — 3rd Edition/CSA 22.2. No. 60950 |
| Canada |
cUL certified — 3rd Edition/CSA 22.2. No. 60950- for Canada (product beat the single cUL mark for U.S. and Canada) |
| Europe |
Low Voltage Directive, 73/23/EEC TUV/CB to EN60950 3rd Edition TUV/CB — EMKO-TSE (74-SEC) 207/94 |
| International |
TUV/CB to IEC 60950 3rd Edition plus all international deviations |
| Australian/New Zealand |
CB Report to IEC 60950, 3rd Edition plus international deviations |
| Electromagnetic Compatibility (EMC) |
| USA |
FCC CFR 47 Part 2 and 15, Verified Class A Limits |
| Canada |
IC ICES-003 Class A Limit |
| Europe |
EMC Directive, 89/336/EEC
EN55022, Class A Limit, Radiated and Conducted Emissions
EN55024 ITE Specific Immunity Standard
EN61000-4-2 ESD Immunity (Level 2 Contact Discharge, Level 3 Air Discharge)
EN61000-4-3 Radiated Immunity (Level 2)
EN61000-4-4 Electrical Fast Transient (Level 2)
EN61000-4-5 AC Surge
EN61000-4-6 Conducted RF
EN61000-4-8 Power Frequency Magnetic Fields
EN61000-4-11 Voltage Dips and Interrupts
EN61000-3-2 Limit for Harmonic Current Emissions
EN61000-3-3 Voltage Flicker |
| Japan |
VCCI Class A ITE (CISPR 22, Class A Limit)
IEC 1000-3-2 Limit for Harmonic Current Emissions |
| Australian/New Zealand |
AS/NZS 3548, Class A Limit |
| Taiwan |
BSMI Approval |
| Korea |
RRL Approval |
| Russia |
GOST Approved |
| International |
CISPR 22, Class A Limit |
1 The operating system in the blade server must provide USB support for the blade server to recognize and use the keyboard, mouse, CD-ROM drive, and diskette drive. The SBCE unit uses USB for internal communications with these devices.
|
ΦIntel® EM64T requires a computer system with a processor, chipset, BIOS, operating system, device drivers and applications enabled for Intel EM64T. Processor will not operate (including 32-bit operation) without an Intel EM64T-enabled BIOS. Performance will vary depending on your hardware and software configurations. Intel EM64T-enabled OS, BIOS, device drivers and applications may not be available. See www.intel.com/technology/64bitextensions/ for more information including details on which processors support Intel EM64T or consult with your system vendor for more information.
|
Intel® products are not intended for use in medical, life saving, or life sustaining applications. Intel® may make changes to specifications and product descriptions at any time, without notice.
|
Intel, the Intel logo, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States.
|
