|
Updated: September 2008
System Memory Features
The Desktop Board supports the dual or single channel memory configurations defined below.
- Four 240-pin Double Data Rate 2 (DDR2) SDRAM Dual Inline Memory Module (DIMM) connectors with gold-plated contacts
- Non-ECC, 1.8 V, DDR2 800/667 MHz memory
- Serial Presence Detect (SPD) memory only
- Unbuffered, non-registered single- or double-sided DIMMs (except double-sided DIMMs with x16 organization)
- Up to 2.0 GB utilizing 256 Mb technology
- Up to 4.0 GB utilizing 512 Mb or 1 Gb technology
- Up to 8.0 GB utilizing 1 Gb technology
- A minimum of 512 MB of total memory is required
Notes:
- To be fully compliant with all applicable Intel® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation.
- System resources and hardware (such as PCI Express) require physical memory address locations that can reduce available addressable system memory. This could result in a reduction of as much as 1 GB or more of physical addressable memory being available to the operating system and applications, depending on the system configuration and operating system.
Supported Memory Configurations
| DIMM Type |
SDRAM Technology |
Smallest usable DIMM |
Largest usable DIMM |
Maximum capacity with two identical x8 double-sided DIMMs |
| DDR2 667 |
512 Mbit |
256 MB |
1 GB |
4 GB |
| DDR2 667 |
1 Gbit |
512 MB |
2 GB |
8 GB |
| DDR2 800 |
512 Mbit |
256 MB |
1 GB |
4 GB |
| DDR2 800 |
1 Gbit |
512 MB |
2 GB |
8 GB | |
NOTE
To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency.
Tested Memory
3rd Party Tested Memory*
3rd party tested memory occurs as requested by the memory vendors and is tested at an independent memory house that is not a part of Intel - Computer Memory Test Labs (CMTL).
Vendor Self Tested Memory
Intel supplies the memory vendors that participate in this program with a common memory test plan to use as a basic checkout of the memory stability. Memory listed here was either tested by the memory vendor or by Intel using this test plan. These part numbers may not be readily available throughout the product life cycle.
The table below lists parts which passed testing conducted using Intel's Self Test program for Intel® Desktop Board DP43TF. For a complete explanation of the self test see the Desktop Board Component Functional Testing Levels page.
|
Module Supplier / Module Part Number |
Module Size |
Module Speed (Mhz) |
ECC or Non-ECC? |
DIMM Organization |
Module Date Code |
Component Used / Comp Part Number |
|
Aeneon* AET760UD00-25D |
1 GB |
800 |
Non-ECC |
DS x 8 |
0749 |
Aeneon AET93R25D |
|
Corsair* CM2X1024-6400 G |
1 GB |
800 |
Non-ECC |
DS x 8 |
07301474-0 |
|
|
Elixir* M2Y1G64TU8HB4B-3C |
1 GB |
667 |
Non-ECC |
DS x 8 |
0805.SG |
Elixir N2TU51280BE-3C |
|
Elixir M2Y51264TU88A2B-3C |
512 MB |
667 |
Non-ECC |
SS x 8 |
0707 |
Elixir N2TU51280AE-3C |
|
Elixir M2Y51264TU88B4B-25C |
512 MB |
800 |
Non-ECC |
SS x 8 |
0713 |
Elixir N2TU51280BE-25C |
|
Elixir M2Y51264TU88BOB-25C |
512 MB |
800 |
Non-ECC |
SS x 8 |
0649 |
Elixir N2TU51280BE-25C |
|
Elpida* EBE11UD8AEFA-6E-E |
1 GB |
667 |
Non-ECC |
DS x 8 |
0516 |
Elpida E5108AE-6E-E |
|
Infineon* HYS64T32000HU-2.5-B |
256 MB |
800 |
Non-ECC |
SS x 4 |
0620 |
Infineon HYB181512160BF-2.5 |
|
Infineon HYS64T64000HU-3S-A |
512 MB |
667 |
Non-ECC |
SS x 8 |
|
Infineon HYB181512 800AF3S |
|
Kingmax* KLCC28F-A8KB5 |
512 MB |
667 |
Non-ECC |
SS x 8 |
0631 |
Kingmax KKEA88B4IAUG-29XX |
|
Kingmax KLDC28F-A8KB5 |
512 MB |
800 |
Non-ECC |
SS x 8 |
0714 |
Kingmax KKEA88B4LZUG-25DF |
|
Kingston* KVR667D2N5/1G |
1 GB |
667 |
Non-ECC |
DS x 8 |
BSMH1670776 |
Hynix HY5PS12B21C |
|
Kingston KVR667D2N5/2G |
2 GB |
800 |
Non-ECC |
SS x 8 |
BKME1640819 |
Elpida E1108ACBG-6E-E |
|
Kingston KVR667D2N5/2G |
2 GB |
667 |
Non-ECC |
DS x 8 |
BSME1620828 |
Elpida E1108ACBG-6E-E |
|
Kingston KVR800D2N5/1G-SP |
1 GB |
800 |
Non-ECC |
SS x 8 |
BSMH1630668 |
STARRAM* 128MX8T2 |
|
Micron* MT16HTF6464AY-667BS |
512 MB |
667 |
Non-ECC |
DS x 8 |
0523 |
Micron 5KB42D9DPN |
|
Nanya* NT512T64U88A1BY-3C |
512 MB |
667 |
Non-ECC |
SS x 8 |
0536 |
Nanya NT5TU64M8AE-3C |
|
Samsung* M378T2953EZ3 |
1 GB |
800 |
Non-ECC |
DS x 8 |
0727 |
K4T51083QE |
|
Samsung M378T3354CZ3-CE6 |
256 MB |
667 |
Non-ECC |
SS x 4 |
0522 |
Samsung K41511630C-ZCE6 |
|
Samsung M378T5663QZ3-CF7 |
2 GB |
800 |
Non-ECC |
DS x 8 |
0807 |
K4T1G084QQ | |
This applies to:
| 
