|
If you are using the following operating systems, refer to enabling Hi-Speed USB 2.0 drivers:
- Microsoft* Windows* XP
- Windows 2000
- Windows 98SE
- Windows Me
All other operating systems do not provide USB 2.0 support. If you are using an operating system that does not support Hi-Speed USB 2.0, recommendation is to disable feature in the system BIOS setup program. Follow the steps below to disable Hi-Speed USB 2.0.
Disable USB 2.0:
- Reboot (or power on) system
- Press "F2" during POST (Power-on Self Test) to enter system BIOS setup program
- Select "ADVANCED" menu using arrow (left and right) keys
- Select "USB Configuration" and press <enter>
- Disable "High-speed USB"
- Press "F10" to Save & Exit BIOS setup program
Hi-Speed USB 2.0 controllers are now disabled and should eliminate the Yellow BANG (!) in Hardware Devices.
For addition BIOS Setup program configuration information, be sure to refer to the Technical Product Specification for your Intel Desktop Board.
This applies to:
| 
