|
The Intel® C440GX+ Server Board memory module has 4 dual in-line memory module (DIMM) sockets that support up to 2GB of
PC100 & PC133-compliant SDRAM system memory. The Intel® 82440GX AGP set supports different varieties of DIMM size,
manufacturer, and speed. The BIOS will automatically detect the memory type, size, and speed.
The following memory features are supported:
- 168-pin gold-plated SDRAM DIMMs
- Unbuffered or Registered 100MHz & 133MHz SDRAM ECC or Non-ECC DIMMs;
- 32MB
- 64MB
- 128MB
- 256MB
512MB
3.3v memory only
Single or double-sided DIMMs
Single layer or "stacked component" DIMMs
*Intel strongly recommends the use of ECC memory in all server systems.
The Intel® Pentium® II Xeon® and the Intel® Pentium® III Xeon® processors used with the C440GX+ Server Board with a 100MHz-system bus must be paired only with 100MHz SDRAM DIMMs.

Note: PDF Files require Adobe Acrobat* Reader†

† This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.
This applies to:
|