The following table provides a list of supported operating systems for the Intel® Entry Server Board SE7230NH1-E. Each of the listed operating systems was tested for compatibility with Intel® Entry Server Board SE7230NH1-E base system configuration listed in Section 2 of the Tested Hardware and Operating System List document. Operating systems are supported only with the specified base system configuration(s) with which they were tested.

The following table also indicates whether each operating system received basic installation testing, or adapter / peripheral compatibility and stress testing. If there is no installation guidelines noted in the following table, then the operating system installed as expected using manufacturer’s installation.

Operating systems supported by Intel® Server Management software may be different than the operating systems supported by the server board. Please reference the Readme and User Guide documents that are included as part of each Intel Server Management distribution for operating systems that are supported by that release.

1. Adapter/Peripheral Compatibility and Stress testing is performed only on the most current release of a supported operating system at the time of a given validation run. The Adapter/Peripheral Compatibility and Stress testing process consists of three areas: Base Platform, Multiple Adapter, and Endurance:
   1. Base Platform: Each base platform will successfully install a given operating system, successfully run a disk stress test, and successfully run a network stress test. 
   2. Multiple Adapters: Multiple adapter validation (MAV) testing uses configurations and test suites to gain an accurate view of how the server performs under varying complex configurations while interacting with network clients. Each configuration is tested for at least 12 hours. 
   3. Endurance Test: This test sequence uses configurations that include 2-6 add-in adapters (depending on chassis used) for a minimum 72-hour test run without injecting errors. Each configuration passes an installation test, a Network/Disk Stress test, and tape backup test. Any fatal errors that occur will require a complete test restart. 
2. Basic Installation Testing is performed with each supported operating system. Basic installation testing validates that the server board can install the operating system and that the base hardware feature set is functional. A small set of peripherals is used for installation purposes only. No add-in adapter cards are tested. Testing may include network connectivity and running of proprietary and industry standard test suites. 

This applies to:

Intel® Entry Server Board SE7230NH1-E Intel® Entry Server System SR1475NH1-E