|
If you lose Intel® AMT password, it can be recovered by "Reset AMT Defaults" which is under the "Server Management" tab in the BIOS. It will be unselectable unless you follow the procedure:
- Power off the system and disconnect AC power.
- Move jumper to 2-3 pin on J1H3 and keep AC power disconnected for about 15 seconds.
- Power system on and go into BIOS with F2
- Enable ASF in BIOS (located few lines above "Reset AMT Defaults" on the "Server Management" Tab)
- Select "Reset AMT Defaults". Wait about 1 minute for the operation to be finished.
Note: Remember to return J1H3 jumper to the 1-2 position.
This applies to:
| 
