Support & Downloads

Browse By Product



Search
Support & Downloads
Server Products
Server Products
Intrusion switch connector does not fit on the Intel(R) STL2 Server Board

Symptom(s):
Intrusion switch connector does not fit.

Cause:
There is not enough clearance to attach to the 6A connector because the PCI add-in card is indented.

Solution:
The intrusion switch should be connected to the Intel® STL2 Server Board jumper 1L4 pins 3-5.

This applies to:
Intel® Server Board STL2
SR2050 Server Chassis

End of Interactive Support Announcement
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "LEGAL INFORMATION" LINK BELOW.For information on currently available Intel products, please see www.intel.com and/or developer.intel.com
Solution ID: CS-000298 (1.0.3004506.3098425)
Date Created: 17-Dec-2002
Last Modified: 18-Dec-2002
Back to Top