Support & Downloads

Browse By Product



Search
Support & Downloads
Server Products
Intel® RAID Controllers
Intel® RAID Controllers & ICP Vortex* RAID Controllers (Halt During POST)

When booting the Intel® Server Boards SDS2 and SKA4 with an Intel® RAID Controller or ICP Vortex* RAID Controller installed, the system will halt during POST when the Intel® Server Board SDS2 BIOS logo screen is enabled. This issue occurs only with Intel® RAID Controllers running version 6.2.6i firmware and ICP Vortex* Controllers running version 28 firmware.

icon  Technical Advisory [PDF]
File Name: ta-507.pdf
Size: 18,483 bytes
Date: March 12, 2002
File Revision: TA-507-02

Note: PDF Files require Adobe Acrobat* Reader†



  † This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.

This applies to:
Intel® RAID Controller SRCMR
Intel® RAID Controller SRCS14L
Intel® RAID Controller SRCU32
Intel® RAID Controller SRCU42L
Intel® RAID Controller SRCZCR
Intel® Server RAID Controller SRCU21
Intel® Server RAID Controller SRCU31
Intel® Server RAID Controller SRCU31A
Intel® Server RAID Controller SRCU31L
Intel® Server RAID Controller SRCU31LA

End of Interactive Support Announcement
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "LEGAL INFORMATION" LINK BELOW.For information on currently available Intel products, please see www.intel.com and/or developer.intel.com
Solution ID: CS-010786
Date Created: 03-May-2004
Last Modified: 05-Jul-2007
Back to Top