The Intel® Server Board SE7520AF2 supports the Dual-Core Intel® Xeon® Processor 2.80GHz with 800MHz front side bus.

The following are the required pieces to enable interoperability.

Hardware Requirements :

• The Intel® Server Board SE7520AF2 board revision should be -703 or higher. You can verify the Product Board Assembly (PBA) number by looking at the white sticker marking on the baseboard. The PBA number is in a format xxxxxx-xxx, where the first 6 alpha-numeric characters represents the board SKU, and the last 3 digit represent the board revision.
• Only the Intel® Server Chassis SC5300-LX SKU is the supported chassis at this time. Use the current Power Budget Tool available on support to compute for the power requirements when integrating multiple peripherals.

BIOS/Firmware Requirements

• the Intel® Server Board SE7520AF2 BIOS should be Production BIOS 9.10 or later.
• a FRUSDR revision 6.6.4 or later update is required

For the latest order codes for the Intel® Server Board SE7520AF2, check the Spares and Configuration Guide.

Note:
Distributors may have inventory of server board revisions that do and do not support Dual-Core Intel® Xeon® Processor 2.80GHz with 800MHz front side bus processors. If you are planning to integrate with dual-core processors, please be sure to specify to your distributor that you require a board revision that will support dual-core processors.

This applies to:

Intel® Server Board SE7520AF2 Intel® Server Chassis SC5300 Intel® Server System SC5300AF2 Intel® Xeon® Processor