Intel has verified the Novell NetWare* v. 6.0 can be successfully installed to the Intel ® Server Board SDS2 when Netware v. 6.0 SP1 is applied. The procedure for applying SP1 is as follows:

1. Create a 200MB bootable DOS partition on the installation hard drive.
2. Format the partition and create a directory called ?nwupdate?.
3. Copy server.exe from the SP1 directory ?startup? into the ?nwupdate? directory.
4. Launch the Novell NetWare* v. 6.0 install, and select to use the existing boot partition.

This applies to:

Intel® Server Board SDS2