|
The Intel® Server Board SE7520JR2 has six DIMM slots, or three DIMM banks. Both DIMMs in a bank should be identical (same manufacturer, CAS latency, number of rows, columns and devices, timing parameters etc.). Although DIMMs within each bank must be identical, the BIOS supports various DIMM sizes and configurations allowing the banks of memory to be different. Memory sizing and configuration is guaranteed only for qualified DIMMs approved by Intel.
The Intel® Server Board SE7520JR2 is capable of supporting either DDR266/333 or DDR2 -400 memory technologies depending on which baseboard SKU is being used.
Note: Industry naming conventions for equivalent memory technologies include the following:
- DDR - 266 = PC-2100
- DDR - 333 = PC-2700
- DDR2 - 400 = PC2-3200
The following maximum memory capacities are supported based on the number of DIMM slots provided and maximum supported memory loads by the chipset:
24GB maximum capacity for DDR-266
16GB maximum capacity for DDR-333 and DDR2-400
The minimum memory supported with the system running in single channel memory mode is: 256MB for DDR-256, DDR-333 and DDR2-400.
Supported DIMM capacities are as follows:
DDR-266 Memory DIMM sizes include: 256MB, 512MB, 1GB, 2GB, and 4GB.
DDR-333 Memory DIMM sizes include: 256MB, 512MB, 1GB, 2GB, and 4GB.
DDR2-400 Memory DIMM sizes include: 256MB, 512MB, 1GB, 2GB, and 4GB.
Note: PDF Files require Adobe Acrobat* Reader*
This applies to:
| 
