|
Intel® Pentium® M Processors are specified to operate at the voltages provided in Table 1. Enhanced Intel SpeedStep® Technology has two voltages, one for each performance mode. It is important to verify that the laptop explicitly supports the specific processor (by type, stepping and speed).
Table 1. Voltage Requirements for Intel Pentium M Processors
90nm processors
|
Maximum Performance Mode |
Battery Optimized Mode |
|
Processor
Number |
Frequency |
Voltage |
Power Consumption |
Frequency |
Voltage |
Power Consumption
|
|
780 |
2.26 GHz |
1.260 -1.372V |
27.0 W |
800 MHz |
0.988V |
10.8 W |
|
778 |
1.60 GHz |
1.116V |
10.0 W |
600 MHz |
0.988V |
7.5 W |
|
770 |
2.13 GHz |
1.260 -
1.356V |
27.0 W |
800 MHz |
0.988V |
10.8 W |
|
765 |
2.10GHz |
1.308-1.356V |
21.0 W |
600MHz |
0.988V |
7.5W |
|
760 |
2 GHz |
1.260 -
1.356V |
27.0 W |
800 MHz |
0.988V |
10.8 W |
|
755 |
2 GHz |
1.276 -1.340V |
21.0 W |
600 MHz |
0.988V |
7.5 W |
|
750 |
1.86 GHz |
1.260 -
1.356V |
27.0 W |
800 MHz |
0.988V |
10.8 W |
|
745 |
1.80 GHz |
1.276 -1.340V |
21.0 W |
600 MHz |
0.988V |
7.5 W |
|
740 |
1.73 GHz |
1.260 -
1.356V |
27.0 W |
800 MHz |
0.988V |
10.8 W |
|
735 |
1.70 GHz |
1.276 -1.340V |
21.0 W |
600 MHz |
0.988V |
7.5 W |
|
730 |
1.60 GHz |
1.260 -
1.356V |
27.0 W |
800 MHz |
0.988V |
10.8 W |
|
725 |
1.60 GHz |
1.276 -1.340V |
21.0 W |
600 MHz |
0.988V |
7.5 W |
|
715 |
1.50 GHz |
1.276 -1.340V |
21.0 W |
600 MHz |
0.988V |
7.5 W |
|
738 |
1.40 Ghz
|
1.160V |
10.0 W |
600 MHz |
0.988V |
7.5 W |
|
733 |
1.10 Ghz
|
0.940V |
5.0 W |
600 MHz |
0.812V |
3.0 W |
|
723 |
1 Ghz
|
0.940V |
5.0 W |
600 MHz |
0.812V |
3.0 W |
|
.13 micron processors
|
Maximum Performance Mode |
Battery Optimized Mode |
|
Frequency |
Voltage |
Power Consumption |
Frequency |
Voltage |
Power Consumption |
|
1.70 GHz |
1.48 V |
24.5 W |
600 MHz |
0.956 V |
6.0 W |
|
1.60 GHz |
1.484 V |
24.5 W |
600 MHz |
0.956 V |
6.0 W |
|
1.50 GHz |
1.484 V |
24.5 W |
600 MHz |
0.956 V |
6.0 W |
|
1.40 GHz |
1.484 V |
22.0 W |
600 MHz |
0.956 V |
6.0 W |
|
1.30 GHz |
1.388 V |
22.0 W |
600 MHz |
0.956 V |
6.0 W |
|
1.20 GHz |
1.39 V |
12.0W |
600 MHz |
0.956 V |
6.0 W |
|
1.10 GHz |
1.10 V |
12.0W |
600 MHz |
0.956 V |
6.0 W |
|
1 GHz |
1.39 V |
7.0W |
600 MHz |
0.844 V |
6.0 W |
|
900 MHz |
1.004 V |
7.0W |
600 MHz |
0.844 V |
6.0 W |
|
Proper voltage must be supplied for reliable operation. Most laptops now use Voltage ID (VID) programmable voltage regulators to allow the processor to program the correct voltage during power-on. If your laptop does not use a VID programmable voltage regulator, it should come with jumpers or switches to set the correct voltage. Consult your laptop manual for instructions on setting the proper voltage. Since the operating voltage of Intel Pentium M Processors may be changed as the processor goes through stepping changes, VID-programmable voltage regulators are the preferred solution.
For complete voltage information, refer to the Intel Pentium M Processors Datasheet.
This applies to:
| 
